Tuesday, 11 December 2018

Engineers produce smallest 3-D transistor yet.

Process that modifies semiconductor material atom by atom could enable higher-performance electronics.


Researchers from MIT and the University of Colorado have fabricated a 3-D transistor that’s less than half the size of today’s smallest commercial models. To do so, they developed a novel microfabrication technique that modifies semiconductor material atom by atom.

The inspiration behind the work was to keep up with Moore’s Law, an observation made in the 1960s that the number of transistors on an integrated circuit doubles about every two years. To adhere to this “golden rule” of electronics, researchers are constantly finding ways to cram as many transistors as possible onto microchips. The newest trend is 3-D transistors that stand vertically, like fins, and measure about 7 nanometers across — tens of thousands of times thinner than a human hair. Tens of billions of these transistors can fit on a single microchip, which is about the size of a fingernail.

As described in a paper presented at this week’s IEEE International Electron Devices Meeting, the researchers modified a recently invented chemical-etching technique, called thermal atomic level etching (thermal ALE), to enable precision modification of semiconductor materials at the atomic level. Using that technique, the researchers fabricated 3-D transistors that are as narrow as 2.5 nanometers and more efficient than their commercial counterparts.

Similar atomic-level etching methods exist today, but the new technique is more precise and yields higher-quality transistors. Moreover, it repurposes a common microfabrication tool used for depositing atomic layers on materials, meaning it could be rapidly integrated. This could enable computer chips with far more transistors and greater performance, the researchers say.

“We believe that this work will have great real-world impact,” says first author Wenjie Lu, a graduate student in MIT’s Microsystems Technology Laboratories (MTL). “As Moore’s Law continues to scale down transistor sizes, it is harder to manufacture such nanoscale devices. To engineer smaller transistors, we need to be able to manipulate the materials with atomic-level precision.”

Joining Lu on the paper are: Jesus A. del Alamo, a professor of electrical engineering and computer science and an MTL researcher who leads the Xtreme Transistors Group; recent MIT graduate Lisa Kong ’18; MIT postdoc Alon Vardi; and Jessica Murdzek, Jonas Gertsch, and Professor Steven George of the University of Colorado.

Atom by atom

Microfabrication involves deposition (growing film on a substrate) and etching (engraving patterns on the surface). To form transistors, the substrate surface gets exposed to light through photomasks with the shape and structure of the transistor. All material exposed to light can be etched away with chemicals, while material hidden behind the photomask remains.

The state-of-the-art techniques for microfabrication are known as atomic layer deposition (ALD) and atomic layer etching (ALE). In ALD, two chemicals are deposited onto the substrate surface and react with one another in a vacuum reactor to form a film of desired thickness, one atomic layer at a time.

Traditional ALE techniques use plasma with highly energetic ions that strip away individual atoms on the material’s surface. But these cause surface damage. These methods also expose material to air, where oxidization causes additional defects that hinder performance.

In 2016, the University of Colorado team invented thermal ALE, a technique that closely resembles ALD and relies on a chemical reaction called “ligand exchange.” In this process, an ion in one compound called a ligand — which binds to metal atoms — gets replaced by a ligand in a different compound. When the chemicals are purged away, the reaction causes the replacement ligands to strip away individual atoms from the surface. Still in its infancy, thermal ALE has, so far, only been used to etch oxides.

In this new work, the researchers modified thermal ALE to work on a semiconductor material, using the same reactor reserved for ALD. They used an alloyed semiconductor material, called indium gallium arsenide (or InGaAs), which is increasingly being lauded as a faster, more efficient alternative to silicon.

The researchers exposed the material to hydrogen fluoride, the compound used for the original thermal ALE work, which forms an atomic layer of metal fluoride on the surface. Then, they poured in an organic compound called dimethylaluminum chloride (DMAC). The ligand-exchange process occurs on the metal fluoride layer. When the DMAC is purged, individual atoms follow.

The technique is repeated over hundreds of cycles. In a separate reactor, the researchers then deposited the “gate,” the metallic element that controls the transistors to switch on or off.

In experiments, the researchers removed just .02 nanometers from the material’s surface at a time. “You’re kind of peeling an onion, layer by layer,” Lu says. “In each cycle, we can etch away just 2 percent of a nanometer of a material. That gives us super high accuracy and careful control of the process.”

Because the technique is so similar to ALD, “you can integrate this thermal ALE into the same reactor where you work on deposition,” del Alamo says. It just requires a “small redesign of the deposition tool to handle new gases to do deposition immediately after etching. … That’s very attractive to industry.”

Thinner, better “fins”

Using the technique, the researchers fabricated FinFETs, 3-D transistors used in many of today’s commercial electronic devices. FinFETs consist of a thin “fin” of silicon, standing vertically on a substrate. The gate is essentially wrapped around the fin. Because of their vertical shape, anywhere from 7 billion to 30 billion FinFETs can squeeze onto a chip. As of this year, Apple, Qualcomm, and other tech companies started using 7-nanometer FinFETs.

Most of the researchers’ FinFETs measured under 5 nanometers in width — a desired threshold across industry — and roughly 220 nanometers in height. Moreover, the technique limits the material’s exposure to oxygen-caused defects that render the transistors less efficient.

The device performed about 60 percent better than traditional FinFETs in “transconductance,” the researchers report. Transistors convert a small voltage input into a current delivered by the gate that switches the transistor on or off to process the 1s (on) and 0s (off) that drive computation. Transconductance measures how much energy it takes to convert that voltage.

Limiting defects also leads to a higher on-off contrast, the researchers say. Ideally, you want high current flowing when the transistors are on, to handle heavy computation, and nearly no current flowing when they’re off, to save energy. “That contrast is essential in making efficient logic switches and very efficient microprocessors,” del Alamo says. “So far, we have the best ratio [among FinFETs].”

Saturday, 3 November 2018

A better device for measuring electromagnetic radiation

The new bolometer is faster, simpler, and covers more wavelengths.


Bolometers, devices that monitor electromagnetic radiation through heating of an absorbing material, are used by astronomers and homeowners alike. But most such devices have limited bandwidth and must be operated at ultralow temperatures. Now, researchers say they’ve found an ultrafast yet highly sensitive alternative that can work at room temperature — and may be much less expensive.

The findings, published today in the journal Nature Nanotechnology, could help pave the way toward new kinds of astronomical observatories for long-wavelength emissions, new heat sensors for buildings, and even new kinds of quantum sensing and information processing devices, the multidisciplinary research team says. The group includes recent MIT postdoc Dmitri Efetov, Professor Dirk Englund of MIT’s Department of Electrical Engineering and Computer Science, Kin Chung Fong of Raytheon BBN Technologies, and colleagues from MIT and Columbia University.

“We believe that our work opens the door to new types of efficient bolometers based on low-dimensional materials,” says Englund, the paper’s senior author. He says the new system, based on the heating of electrons in a small piece of a two-dimensional form of carbon called graphene, for the first time, combines both high sensitivity and high bandwidth — orders of magnitude greater than that of conventional bolometers — in a single device.

“The new device is very sensitive, and at the same time ultrafast,” having the potential to take readings in just picoseconds (trillionths of a second), says Efetov, now a professor at ICFO, the Institute of Photonic Sciences in Barcelona, Spain, who is the paper’s lead author. “This combination of properties is unique,” he says.

The new system also can operate at any temperature, he says, unlike current devices that have to be cooled to extremely low temperatures. Although most actual applications of the device would still be done under these ultracold conditions, for some applications, such as thermal sensors for building efficiency, the ability to operate without specialized cooling systems could be a real plus. “This is the first device of this kind that has no limit on temperature,” Efetov says.

The new bolometer they built and demonstrated under laboratory conditions, can measure the total energy carried by the photons of incoming electromagnetic radiation, whether that radiation is in the form of visible light, radio waves, microwaves, or other parts of the spectrum. That radiation may be coming from distant galaxies, or from the infrared waves of heat escaping from a poorly insulated house.

The device is entirely different from traditional bolometers, which typically use a metal to absorb the radiation and measure the resulting temperature rise. Instead, this team developed a new type of bolometer that relies on heating electrons moving in a small piece of graphene, rather than heating a solid metal. The graphene is coupled to a device called a photonic nanocavity, which serves to amplify the absorption of the radiation, Englund explains.

“Most bolometers rely on the vibrations of atoms in a piece of material, which tends to make their response slow,” he says. In this case, though, “unlike a traditional bolometer, the heated body here is simply the electron gas, which has a very low heat capacity, meaning that even a small energy input due to absorbed photons causes a large temperature swing,” making it easier to make precise measurements of that energy. Although graphene bolometers had previously been demonstrated, this work solves some of the important outstanding challenges, including efficient absorption into the graphene using a nanocavity, and the impedance-matched temperature readout.

The new technology, Englund says, “opens a new window for bolometers with entirely new functionalities that could radically improve thermal imaging, observational astronomy, quantum information, and quantum sensing, among other applications.”

For astronomical observations, the new system could help by filling in some of the remaining wavelength bands that have not yet had practical detectors to make observations, such as the “terahertz gap” of frequencies that are very difficult to pick up with existing systems. “There, our detector could be a state-of-the-art system” for observing these elusive rays, Efetov says. It could be useful for observing the very long-wavelength cosmic background radiation, he says.

Daniel Prober, a professor of applied physics at Yale University who was not involved in this research, says, “This work is a very good project to utilize the many benefits of the ultrathin metal layer, graphene, while cleverly working around the limitations that would otherwise be imposed by its conducting nature.” He adds, “The resulting detector is extremely sensitive for power detection in a challenging region of the spectrum, and is now ready for some exciting applications.”

And Robert Hadfield, a professor of photonics at the University of Glasgow, who also was not involved in this work, says, “There is a huge demand for new high-sensitivity infrared detection technologies. This work by Efetov and co-workers reporting an innovative graphene bolometer integrated into a photonic crystal cavity to achieve high absorption is timely and exciting.”

Content Credits: MIT News

Wednesday, 8 August 2018

Flexible Loudspeaker Made of Nano wires Will Stick to Your Skin and Play Music

Researchers in South Korea made a tiny loudspeaker and then used it to play a violin concerto

   By Dexter Johnson


A variety of nanomaterials have been used over the years in loudspeaker and microphones. Nanoparticles have replaced permanent magnets in loudspeakers and a thin film of carbon nanotubes has done pretty much the same. And, of course, someone tried to use grap microphones. 


Now researchers at Ulsan National Institute of Science and Technology (UNIST) in South Korea have made a nanomembrane out of silver nanowires to serve as flexible loudspeakers or microphones. The researchers even went so far as to demonstrate their nanomembrane by making it into a loudspeaker that could be attached to the skin and used it to play the final movement of a violin concerto—namely, La Campanella by Niccolo Paganini.

In research described in the journal Science Advances, the Korean researchers embedded a silver nanowire network within a polymer-based nanomembrane. The decision to use silver nanowires rather than the other types of nanomaterials that have been used in the past was based on the comparative ease of hybridizing the nanowires into the polymer.

In addition, the researchers opted for nanowires because the other materials like graphene and carbon nanotubes are not as mechanically strong at nanometer-scale thickness when in freestanding form, according to Hyunhyub Ko, an associate professor at UNIST and coauthor of the research. It is this thickness that is the critical element of the material.

“The biggest breakthrough of our research is the development of ultrathin, transparent, and conductive hybrid nanomembranes with nanoscale thickness, less than 100 nanometers,” said Ko. “These outstanding optical, electrical, and mechanical properties of nanomembranes enable the demonstration of skin-attachable and imperceptible loudspeaker and microphone.”

The nanomembrane loudspeaker operates by emitting thermoacoustic sound through the oscillation of the surrounding air brought on by temperature differences. The periodic Joule heating that occurs when an electric current passes through a conductor and produces heat leads to these temperature oscillations.

For the operation of the microphone, the hybrid nanomembrane is sandwiched between elastic films with tiny patterns. In this way, the nanomembrane can precisely detect the sound and the vibration of the vocal cords based on a triboelectric voltage that results from the contact with the elastic films. In these loudspeakers and microphones, the silver nanowires enable both the electrical conductivity and give the nanomembranes their freestanding strength.

While the researchers demonstrated the technology by applying a thin film of the nanomembrane on the skin, this may not turn out to be a practical application of the technology, according to the researchers. This is because the performance of the thermoacoustic loudspeaker is proportional to the speaker size and temperature change of the speaker.

If it were directly attached to the skin, the input power level per unit area would increase too much for the generation of a large sound.

Ko added: “For the commercial applications, the mechanical durability of nanomembranes and the performance of loudspeaker and microphone should be improved further.”

Wednesday, 14 February 2018

Analog Electronics by Behzad Razavi


Get an Insight into Analog Electronics | Behzad Razavi 



1. Charge carriers and Doping concepts. 


           



2. Doping Continued | Drift  




             



3. Diffusion | Introduction to PN Junction 





           

For the complete lecture series follow this link.



Content Courtesy: Behzad Razavi, is an Iranian-American professor and researcher of electrical and electronic engineering.

Digital Electronics | Basics

Get an Insight into the Basics of Digital Electronics  



1. Digital Electronics Overview


           


2. Introduction to Number Systems


            

For the complete lecture series follow this link.


Content Courtesy: Tutorials Point
Engineering Insights

Get an Insight into the world of engineering. Get to know about the trending topics in the field of engineering.

Pages

Follow Us